|
|
|
|
CONVENTIONAL TYPE |
|
1) Bisphenol A Type Epoxy Resins
“JIAFA” E series of epoxy resin is based on bisphenol
A and epichlorohydrin as shown below .The E series is used for
general purpose in such outlets as coatings, adhesives, building
and construction, electrical insulator, structural molding and
so forth. |
|
|
| 1-1 Liquid Type |
| Grade |
Similar
to aboard |
Epoxy
Value (eq/100g) |
Hydroable
Chlorine eq/100g |
Viscosity
pa.s/25℃ |
Color
max Gardner |
Description |
| E-54(616) |
YD-127
EPON826 |
0.53-0.55 |
≤0.01 |
6.0-8.0 |
1 |
Low
viscosity, for fiber impreganation,wound,V.P.I insulate
varnish |
| E-51(618) |
YD-128
EPON828 |
0.50-0.52 |
≤0.005 |
11-14 |
1 |
Standard
resin for electrical potting, composite |
| E-52-D |
YD-128E |
0.51-0.53 |
≤0.003 |
9-12 |
1 |
Hight
purity, for electric insulate A.P.G casting. |
| E-44(6101) |
YD-134 |
0.43-0.48 |
≤0.005 |
S.P*
12-20℃ |
2 |
For
laminate, floor, adhesives, casting. |
| E-42(634) |
|
0.36-0.43 |
≤0.005 |
S.P*
12-27℃ |
2 |
Usage
similar to E-44, mainly for coating. |
| E-39-D |
|
0.37-0.41 |
≤0.003 |
S.P*
24-32℃ |
|
High
purity, for insulate casting |
|
|
*S.P: softening point |
| 1-2 Solid Type (General Type) |
| Grade |
Epoxy
Value eq/100g |
Softening
Point(℃) |
Hydroable
Chlorine eq/100g |
Color
max Gardner |
Description |
| E-20(601) |
0.18-0.22 |
65-75 |
≤0.002 |
3 |
Produced
by taffy process, for insulate finish, crrosionproof
coating, laminate etc. |
| E-21(601T) |
0.20-0.23 |
60-70 |
≤0.002 |
2 |
Produced
by addition method, high purity, and usage similar to
E-20. |
| E-06(607) |
0.04-0.06 |
115-130 |
≤0.002 |
3 |
High
molecular resin, good adhesive to based materials,
mainly for making baking finish. |
| E-03(609) |
0.03-0.04 |
130-145 |
≤0.002 |
3 |
High
molecular resin for making metal bottom finish and
lining coating of food cans. |
|
| 1-3 Solid Type (special design for powder coating) |
| Grade |
Epoxy
Value eq/100g |
Softening
Point℃ |
Hydroable
Chlorine eq/100g |
Color
max Gardner |
Description |
| E-12-F(604F) |
0.11-0.13 |
89-93 |
≤0.002 |
3 |
Manufacture
by water washing process. good adhesive strength and
high gloss. |
| E-13-T |
0.12-0.14 |
88-98 |
≤0.002 |
2 |
Similar
to E-12-F, have good fluidness and high coating
efficiency. |
|
|
|
|